STEREO 140 C62 27.5 SL
856400-H-002856400-H-004 (1)csm_856400-large-01-04_eace52cf5d (1)856400-H-008 (1)csm_856400-large-01-06_5a4b012f8d856400-H-010856400-H-011 (1)856400-H-017csm_856400-large-01-16_47ca22d027856400-H-020856400-H-022csm_856400-large-01-14_e5de70ac0b856400-H-025856400-H-029

CUBE STEREO 140 C:62 SL 27.5 2017


CUBE STEREO 140 C:62 SL 27.5 2017


Product Description

FRAME  C:62 Monocoque Advanced Twin Mold Technology, ATG, ETC 4-Link, AXH

COLOR  carbon´n´green

SIZE  16", 18", 20", 22"

FORK  Rock Shox Pike RC Solo Air, Maxle Stealth, Tapered, 150mm

SHOCK  Fox Float DPS, 200x57mm, Open/Medium/Firm Mode, EVOL Air Canister

SHOCK HARDWARE  Top: 30x8mm, Bottom: 22x8mm

HEADSET  FSA Orbit I-t, Integrated, Top 1 1/8", Bottom 1 1/2"

STEM  Race Face Ride 35

HANDLEBAR  Race Face Ride 35 Riser, 760mm

GRIPS  CUBE Race Grip, 1-Clamp

REAR DERAILLEUR  Sram X1, Type2, 11-Speed

SHIFTERS  Sram X1 Trigger

BRAKE SYSTEM  Sram Guide R, Hydr. Disc Brake (180/180)

CRANKSET  Race Face Aeffect SL 32T, 175mm

CASSETTE  Sram XG-1175, 10-42T

CHAIN  Sram 11-Speed

WHEELSET  DT CSW AM 2.7 Straightpull Wheelset, 28/28 Spokes, 15mm/X12 Boost, 25C, Tubeless Ready

FRONT TIRE  Schwalbe Fat Albert Kevlar 2.35, TrailStar, Tubeless Easy

REAR TIRE  Schwalbe Fat Albert Kevlar 2.35, PaceStar, Tubeless Easy


SEAT POST  Rock Shox Reverb Stealth 31.6mm, 440x150mm (390x125mm for smallest frame size)

SEATCLAMP  CUBE Screwlock, 34.9mm

WEIGHT  12.2 kg

Any bike in the range has to earn the right to wear the "superlight" SL badge. The Stereo 140 C:62 SL 27.5's low weight credentials include both the exceptionally svelte C:62 full carbon frame and a selection of superior components - like Fox and Rock Shox suspension and Sram X1 transmission. There was no room for compromise with this bike. And that means that, whatever challenge you choose, from alpine singletrack to an endurance event, the Stereo SL will be more than up for it.


Matured over the years, every detail refined and tweaked to perfection. With its full carbon frame constructed using the Advanced Twin Mold technique, 140mm of superbly efficient and comfortable ETC suspension and a lively ride feel courtesy of our Agile Trail Geometry (ATG), we reckon there's not much room left for improvement. We've built in the lowest standover for its travel class, meaning you'll have more confidence on technical trails. And as for attention to detail, we've got it covered: high strength 7075 aluminium hardware in the chainstay bearings, a stiff and lightweight full carbon linkage rocker and well thought out internal cable routing.

A bike this fast demands components to match. So they began by selecting a Rock Shox Pike RC fork with tapered steerer and 15mm axle, to keep the front wheel steering accurately and braking swiftly and surely

Rock Shox Pike RC fork
Fox Float DPS shock

And, of course, they went for a full Sram X1 1x11 groupset with Sram Guide R brakes... and fnished the whole lot off with a Rock Shox Reverb Stealth dropper post. This is a bike that wants for nothing…

Then they added a Fox Float DPS shock at the rear, to deliver incredible small bump plush and superlative big bump control. We threw in the superbly strong and light CSW AM 2.7 wheelset shod with tubeless-ready Fat Albert tyres for grip in all conditions.

Sram Guide R, Hydr. Disc brake





Adaptable X12 Hanger

Cube optimized their new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. They can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.

FOX Customized Setup

Sophisticated suspension kinematics are only able to work correctly if the associated shock is properly tuned. They researched and found a specific shock setup in cooperation with Fox Racing Shox, using extensive testing for almost every CUBE full-suspension model.

Press Fit BB

With Press Fit bearings, the bottom bracket bearings are pressed directly into the frame and not screwed in as usual. This gives a wider bottom bracket shell and allows us to build a wider down tube and more broadly-spaced chainstays. Every millimetre of additional width gives a significant improvement in lateral stiffness.

Additional Information

Frame Size

16″, 18″, 20″, 22″